Advanced Brain Technologies Listening Program Waves Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Advanced Brain Technologies Listening Program Waves. Advanced Brain Technologies Listening Program Waves 4 pages. The multi-sensory audio system optimized for the listening program

Imprimer la page
To Operate Waves, cont.
3
|
Connect the 6" cable from the headphone port on your
device to the IN port on the headphone amplifier.
4
|
Power amplifier ON/OFF by pressing and holding power
button until you see "powering on" or "powering off" on
the display.
•
Our high-quality audio processor with dual mode amplification was
chosen specifically to enhance the sound of The Listening Program
•
The ultralight pocket amplifier case houses dual bone and air amplifiers for
separate power control of bone conduction and headphone volumes
•
The intuitive menu system, LCD display, and touch keypad make for easy
amplifier operation
5
|
Charge the amplifier.
•
To connect the charger: plug the mini end of the USB cable into the
amplifier (into the mini USB port that is to the right of the BC port).
•
Fully charge the batteries before first use. Charge the amplifier from
a computer USB port or AC adapter. Allow 3-4 hours to charge.
Batteries provide over 15 hours of use on a single charge.
LED Battery Status Indicator
Low battery
6
|
Connect the amplifier to your device.
•
Waves will connect to any device that has a
1/8" connector. (iPod, smart phone, computer)
2 | WAVES GUIDE
(flashing red LED)
Charging
(flashing green LED)
7
|
Adjust volume on your device to about 80%
of the volume to ensure adequate power is
going to the amplifier.
©Advanced Brain Technologies – advancedbrain.com/waves
Heaphone port
Pocket headphone amplifier
Mini USB port
Full charge
(steady green LED)