Electrolux BRT21R6AB3 Manuel d'utilisation et d'entretien - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien pour {nom_de_la_catégorie} Electrolux BRT21R6AB3. Electrolux BRT21R6AB3 21 pages.

Imprimer la page

This Use & Care Manual provides specific operating

instructions for your model. Use the refrigerator only as

instructed in this Use & Care Manual. Before starting the

refrigerator, follow these important first steps.

LOCATION

•

Choose a place that is near a grounded electrical outlet.

Do Not use an extension cord or an adapter plug.

•

If possible, place the refrigerator out of direct sunlight

and away from the range, dishwasher or other heat

sources.

•

The refrigerator must be installed on a floor that is level

and strong enough to support a fully loaded refrigerator.

•

Consider water supply availability for models equipped

with an automatic ice maker.

INSTALLATION

•

Do Not install the refrigerator where the temperature

will drop below 55°F (13°C) or rise above 110°F (43°C).

The compressor will not be able to maintain proper

temperatures inside the refrigerator.

Do Not block the toe grille on the

lower front of your refrigerator. Sufficient air

circulation is essential for the proper operation of

your refrigerator.

Installation Clearances

•

Allow the following clearances for ease of installation,

proper air circulation, and plumbing and electrical

connections:

Sides & Top --------------- 3/8"

Back ------------------------ 1"

NOTE: If you see black coils/tubing on the back of your

refrigerator (air-cooled condenser) leave 3" clearance at

top of refrigerator.

DOOR OPENING

NOTE: If your refrigerator is placed with the door hinge

side against a wall, you may have to allow additional

space so the door can be opened wider.

Your refrigerator should be positioned to allow easy access

to a counter when removing food. To make this possible, the

direction in which the doors open can be reversed. See Door

Removal & Reversal Instructions on page 6.

Installation

LEVELING

All four corners of your refrigerator must rest firmly on a

solid floor. Your refrigerator is equipped with adjustable front

rollers to help level your unit.

To Level Your Refrigerator:

1. Remove toe grille.

2. Use flat-blade screwdriver or 3/8" socket wrench

to adjust front rollers.

NOTE: Raise the front of the refrigerator enough so the

doors close freely when opened halfway. The refrigerator

should slope ¼" to ½" from front-to-back. Then level the

refrigerator from side to side.