Electrolux Built-In Dishwasher Manuel d'utilisation et d'entretien - Page 29

TO REMOVE THE "HIDDEN BAKE ELEMENT" COVER

1. In order to remove the "hidden bake" cover, pull the back edge with

one hand about 1/2" inch and lift up the "hidden bake" cover with

both hands. (See picture)

2. When reinstalling the "hidden bake" cover, be sure to put it all the

way to the back of the oven and lay it down on the 2 shoulder

screws. Then push the front edge of the cover in its place below the

front bracket.

To have easier access to the "hidden bake" cover, first remove the oven

door by following the instructions above.

IMPORTANT: Always reinstall the "hidden bake" cover before the next

use.

An interior oven light will turn automatically when the oven door is opened. The oven light

may be turned on when the door is closed by using the oven light switch located on the

control panel.

The lamp is covered with a glass shield. The glass shield can be remove to be cleaned

manually or to change oven light.

THIS GLASS SHIELD MUST BE IN PLACE WHENEVER THE OVEN IS IN USE.

To replace the light bulb:

CAUTION: BE SURE THE OVEN IS COOL.

1. Turn the power off at the main source.

2. Wear a leather-faced glove for protection against possible broken

glass.

3. To remove the glass shield, pull the back side of the shield toward

the inside of the oven in a manner to lift it up from the oven side.

4. The glass shield should come out easily by pushing a little toward

front of the wall oven.

5. Replace halogen light appliance bulb taking care to not touch the

bulb. If you touch the halogen bulb with finger that can damage it

and also burn it.

6. To replace glass shield, proceed in reverse.

Care & Cleaning

Lift backside

of glass shield

and remove it.

Halogen

Light Bulb