Electrolux Built-In Dishwasher Manuel d'utilisation et d'entretien - Page 14

Getting Started

When the unit is first plugged in, or when the power supply to the range has been interrupted,

the timer in the display will flash with "12:00". The clock cannot be set when the oven is on. If

an invalid time of day is entered, the control will triple beep to prompt you to re-enter a valid time

of day.

To set the clock (example for 1:30):

1 3 0

1. Press

to raise or lower the actual time displayed.

2. Press START

Sleep Mode:

Your control will remain in a sleep mode when not in use. Only the clock will display during this

mode. You will need to wake the control to begin any function.

Wake Mode:

To wake the control, touch within the display panel. After 2 minutes without activity the control

will beep and go back into sleep mode.

To start a cooking feature you must first select the oven pad. User preferences will be available

during this mode as well as timer, oven light and the control lock.

Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual

temperature will be shown in the display and will rise as the unit preheats. When the unit has

reached its target temperature, a chime will sound to remind you to place the food in the oven.

This feature will be active with some cooking modes; bake, convection bake and convection

roast. The cooking modes which does not feature the temperature visual display will be noted

in their descriptions.

NOTE: The lowest temperature that can be displayed is 100°F.

pads to set the time of day to 1:30. The pads

to accept the changes or CANCEL

can also be pressed

to start with a time of 12:00.