Electrolux Built-In Dishwasher Manuel d'utilisation et d'entretien - Page 31

Electronic Control Settings

USER PREFERENCES

SETTING CLOCK DISPLAY — ON OR OFF

The oven control can be programmed to display the time of day or not. The oven has been

preset at the factory to display the time of day.

Changing clock display between ON and OFF:

1. Press USER PREF

2. Press

to toggle between displaying or hiding the clock.

3. Press START

to accept the changes and go back to user preferences menu display.

SETTING TIME OF DAY DISPLAY — 12 OR 24 HOURS

The oven control can be programmed to display time of day in 12 hours or 24 hours mode.

The oven has been preset at the factory to display in 12 hours mode.

Changing between 12 or 24 hour time of day display:

1. Press USER PREF

Press

to toggle the display of the clock in 12 or 24 hours.

3. Press START

to accept the changes and go back to user preferences menu display.

4. Remember to set your clock after changing the time of day display mode.

The temperature in the oven has been pre-set at the factory. When first using the oven, be sure

to follow recipe times and temperatures. If you think the oven is too hot or too cool, the

temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature

setting that is higher or lower than the recommended temperature. The baking results should

help you to decide how much of an adjustment is needed. Each oven can be individually adjusted.

To adjust the oven temperature:

1. Press USER PREFERENCES

2. Enter the temperature by pressing the

adjusted by ± 35°F.

3. Press START

to accept the changes and go back to user preferences menu display.

(CONTINUED)

until you get to the CLO on menu page.

until you get to the CLO 12hr menu page.

until you get to the

pads. The temperature can only be

UPO menu page.