Electrolux Built-In Dishwasher Manuel d'utilisation et d'entretien - Page 19

Factors Affecting Performance

The hot water line to dishwasher must provide water pressure between 20 and 120

pounds per square inch (psi).

Low water pressure may occur when laundry or showers are in operation. Wait

until water use is reduced before starting dishwasher.

Hot water is needed for best dishwashing and drying results. Water entering the

dishwasher should be at least 120°F (49°C) to give satisfactory results.

To check water temperature entering the dishwasher:

1 Turn on hot water faucet nearest dishwasher for several minutes to clear cool

water from pipes.

2 Hold a candy or meat thermometer in stream of water to check the

temperature.

3 If temperature is below 120°F (49°C), have a qualified person raise the water

heater thermostat setting.

IMPOR

IMPORT T T T T ANT

IMPOR

Before starting a cycle, run hot water to clear cool water from

pipe.

ANT