Electrolux Built-In Dishwasher Manuel d'utilisation et d'entretien - Page 8

Operating Instructions

STATUS WINDOW

NOT AVAILABLE ON ALL MODELS

The STATUS window displays codes typically seen

during normal operation or programming of the

dishwasher. The window will not display anything

when the door is closed. The STATUS window

indicates the following activity:

1-24

Indicates number of delay start hours for

selected cycle.

Flashes once the program has been

entered and the START/CANCEL pad is

pressed. It also flashes if the door is

opened during a wash cycle. Close the

dishwasher door to begin or continue a

wash cycle.

Flashes to indicate a water heat delay.

Appears in window when dishwasher is

first installed, or when power has been

interrupted. HI-TEMP WASH, SANITIZE

and START/CANCEL backlighting will also

flash. To clear, touch START/CANCEL

pad.

Start/Cancel

To start a cycle, press the START/CANCEL pad

once and close the door. To cancel when a cycle is

running, open the door and press the START/

CANCEL pad once. Close the door again and the

dishwasher will drain and shut off.

NOTE

Opening the door during normal operation will

only pause the selected cycle.

Error Indications

In certain situations which are critical to the ma-

chine function and safe operation, the control shall

shut down and indicate an error code 'Er'. On units

without a display, all indicator lights will flash.

If one of these codes are displayed contact the

Electrolux Customer Care Center at

9044

. They will be able to provide assistance in

troubleshooting the problem and/or locating an

authorized service technician, if needed.

1-800-944-