Electrolux Built-In Dishwasher Manuel d'utilisation - Page 6

Imprimer la page

Electrolux Built-In Dishwasher Manuel d'utilisation

Installation

Installation Location

The appliance should be set up in a well ventilated,

dry room.

Energy use is affected by the ambient temperature.

The appliance should therefore

– not be exposed to direct sunlight;

– not be installed next to radiators, cookers or

other sources of heat;

– only be installed at a location whose ambient

temperature corresponds to the climate classi-

fication, for which the appliance is designed.

The climate classification can be found on the serial

plate, which is located at the left on the inside of the

appliance.

The following table shows which ambient temperature

is correct for each climate classification:

If installation next to a source of heat is unavoidable,

the following minimum clearances must be main-

tained at the sides of the appliance:

– for electric cookers 3 cm;

– for oil and coal fired ranges 30 cm.

If these clearances cannot be maintained a heat insu-

lating pad is required between the cooker and the

refrigeration appliance.

If the refrigeration appliance is installed next to

another refrigerator or freezer a clearance of 5 cm at

the sides is required, in order to prevent the formation

of condensation on the outside of the appliance.

Your refrigerator needs ventilation

The integrated door of the furniture cabinet largely

seals the installation recess. i-appliances must there-

fore be provided with ventilation by having an opening

in the furniture plinth. The warmed air must be able to

be exhausted upwards through the air shaft on the

furniture back. The ventilation cross-sections should

be at least 200 cm

Important note! In order not to impair the function of

the appliance, never cover or obstruct the ventilation

openings.

Installation

See chapter „Installation Instructions".

Please check whether, after installing your appliance

and especially after rehingeing the door, the door

seal seals right round. An untight door seal may lead

Climate

classification

min. 200 cm

to heavy frosting and thereby to a higher power con-

sumption (see also „What to do if...").

for an ambient

temperature of

+10 to +32 °C

+16 to +32 °C

+18 to +38 °C

+18 to +43 °C

min. 200 cm