Advanced Brewing Systems KoolSource KS-1 Manuel d'instruction - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Advanced Brewing Systems KoolSource KS-1. Advanced Brewing Systems KoolSource KS-1 10 pages. Nitro-generator single nitro & iced coffee
Imprimer la page
Power Requirement for Machine:
Voltage: 115V/60Hz
Wattage: 575 Watts
Power for pump:
Voltage: 115v/60Hz
Wattage: 345 Watts
Dimensions W x H x D :
(283mm x 478mm x 495mm)
(11-1∕16''x 18-3/4''x 19-1/2''
IMPORTANT:
The Cooling unit has a time delay of 2 minutes after plugging it in, make sure you give the system time to engage properly.
When compressor stops for the first time (approx. 7 minutes) → unit is ready for dispensing
#INNOVATIONS 4U!
Installation of KoolSource KS-1
Lines Connections:
Out: From Pump to
Coffee IN located in
the back
In: from RTD product
IMPORTANT:
Your RTD product
most be connected
to the pump before
the system is being
turn "ON"
IMPORTANT:
Make sure to install the Strainer in
the appropriate orientation to avoid
any blockage or debris in the system.
2 x (Nema 5-15R)
TO AVOID ANY DAMAGE TO THE SYSTME MAKE SURE ALL
CONNECTION ARE PROPERLY CONNECTED AND SECURITY
WARNING:
RED CLIPS ARE INSTALLED BEFORE THE UNIT IS BEING
PURGE FOR THE FIRST TIME!
(855)532-5522