Bosch FAP-OC 500Series Manuel d'utilisation et d'entretien - Page 6

Imprimer la page

Bosch FAP-OC 500Series Manuel d'utilisation et d'entretien

Oven Bottom

The oven bottom conceals the lower heating element. As a

result the element is protected from damage and spills.

Note:

Do not place food directly on the oven bottom.

9 CAUTION

Do not use aluminum foil or protective liners to line

any part of the appliance, especially the oven

bottom. Installation of these liners may result in a

risk of electric shock or fire.

Accessories

Inserting Racks

9 CAUTION

To avoid burns, place oven racks in desired

positions before turning oven on. Always use oven

mitts when the oven is warm. If a rack must be

moved while the oven is hot, do not let oven mitts

contact hot heating elements.

Use caution when removing an oven rack from the

lowest rack position to avoid contact with the hot

oven door.

To avoid possible injury or damage to the appliance,

ensure flat rack is installed exactly per installation

instructions and not backwards or upside down.

Flat Rack

Do not clean in the Self

Clean oven.

Broiling Pan

(available via eShop)

Pan: #00449757

Grill (top): #00449756

Flat Rack

The rack is designed with a stop so it will stop before

coming completely out of the oven and not tilt.

To insert the flat rack into the oven:

Note: Avoid pushing the rack back forcefully, impacting the

rear of the oven cavity. This may cause risk of damage to

porcelain coating or to glass covers over light fixtures.

1. Grasp rack firmly on both sides.

2. Insert rack (see picture).

3. Tilt rack up (A) to allow the upwardly sloped rear of the

rack to slide under the stop molded into the front

portion of the rack guide above.

4. When the back of the rack is past this stop, lower the

front of the rack to a horizontal position (B) and push it

the rest of the way in.

The rack should be straight and flat, not crooked.

To remove the flat rack from the oven:

1. Grasp rack firmly on both sides and pull rack toward

you.

2. When the stop is reached, tilt rack up so that the

upwardly sloped back of the rack can pass under the

stop. Pull the rack the rest of the way out.

English 6