Bosch SB Series Manuel d'instruction - Page 47

Imprimer la page

Delivery

Your dishwasher has been checked

thoroughly in the factory to ensure that

it is in working order. This may cause

small water stains. These will disappear

after the first wash cycle.

Technical specifications

Weight:

■

up to 60 kg

Voltage:

■

220–240 V, 50 Hz or 60 Hz

Connected load:

■

2000 - 2400 W.

Fuse:

■

10/16 A (UK 13 A).

Power input:

■

Off mode (Po)* 0.10 W.

Left On mode (Pl)* 0.10 W.

*according to regulations (EU) nos.

1016/2010 and 1059/2010.

Additional functions and settings

may increase the power

consumption.

Water pressure:

■

at least 0.05 MPa (0.5 bar),

maximum 1 MPa (10 bar).

At a higher water pressure:

connect pressure-reducing valve

ahead.

Inlet rate:

■

minimum 10 litres/minute

Water temperature:

■

cold water.

Hot water:

Maximum temperature 60 °C.

Capacity:

■

12–15 place settings (depending on

the features of your dishwasher).

Installation and connection en

Installation

The required installation dimensions

can be found in the installation

instructions. Level the appliance with

the aid of the height-adjustable feet.

Ensure that the appliance is situated

securely on the floor.

A built-under or integrated appliance

■

which is installed subsequently as a

free-standing appliance must be

secured to prevent it from

overturning, e.g. by screwing it to the

wall or by installing it under a

continuous worktop which is

screwed to adjacent cupboards.

The appliance can easily be installed

■

in a fitted kitchen between wooden

and plastic walls.

Drainage connection

The required work sequence can be

found in the installation instructions.

If required, fit a siphon with an

drainage connection.

Connect the waste-water hose

to the drainage

connection of the siphon with

the enclosed parts.

Ensure that the drainage hose is not

kinked, crushed or twisted and that

there is no cover

plate in the drainage to prevent

the waste water from flowing out!