Bosch SGE63E06UC/52 Manuel d'instructions d'installation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Bosch SGE63E06UC/52. Bosch SGE63E06UC/52 37 pages.

Imprimer la page

Avoid Scalding

or Electrical

Shock Hazard!

Make sure the water supply and electrical supply

are shut off before installation or service.

NOTE: This dishwasher is designed to be enclosed on the

top and both sides by standard residential kitchen cabinetry.

Select a location as close to the sink as possible for easy

access to water supply and drain lines.

For proper dishwasher operation and appearance, ensure

that the enclosure is square and has the dimensions shown

in Figure 1 below.

Figure 1

After locating the proper place for your new dishwasher,

you will need to create any required openings to allow for

passage of the water, drain and electrical line. In order to

avoid interference with the dishwasher when sliding it into the

cabinet, place your openings within the dimensions shown

in Figure 3 below.

4!/2.

NOTE:

If your

dishwasher

opening

width

measures

>23%" (600mm) use the TOP or SIDE MOUNT mounting

methods.

If your dishwasher

opening width measures 23%"(600mm)

use the ALTERNATE

SIDE MOUNT mounting

method.

If the dishwasher is to be installed in a corner, make sure that

there is adequate clearance to open the door. See Figure

2 below.

Checkclearance

between

dishwasherdoor

Countertop

and wall

Figure 2

Required

Openings:

43/4"

23/8"

(120 x 60mm) = To

pass the included electrical supply

junction box through to adjacent cabinet.

Note: If the incoming electric supply, water supply and drain

connections are all in the same cabinet, the one 43/4"x 23/8"

(120

60mm) hole will be large enough for all three to pass

through.

4" x 2" (100 x 50rnm) - TO pass the included water supply line

toward the water supply

11/4"(32mm) d iameter - To pass the dishwasher

drain hose

toward the drain connection

Before sliding the dishwasher into the cabinet, remove the

hose clip at the back of the dishwasher as shown in Figure

4. The hose clip may be used later to hold the drain hose as

shown in Figure 10.

Figure 4

In select models, remove the rubber apron on top of the

dishwasher and set aside for later use. See Figure 5.

Figure 5

Avoid Electrical

Shock/Fire

Hazard

Do not allow the electrical

and water supply

lines

to touch.