AirStage ABUA12RLAV Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} AirStage ABUA12RLAV. AirStage ABUA12RLAV 17 pages. Indoor unit (floor / ceiling type)
Également pour AirStage ABUA12RLAV : Manuel d'utilisation (8 pages)

Imprimer la page

INSTALLATION MANUAL

PART NO. 9367701094-02

INDOOR UNIT (Floor / Ceiling type)

Contents

SAFETY PRECAUTIONS ........................................................................................... 1

1.1. IMPORTANT! Please read before starting ............................................................ 1

1.2. SPECIAL PRECAUTIONS .................................................................................... 1

ABOUT THE UNIT ...................................................................................................... 2

2.1. Precautions for using R410A refrigerant .................................................................. 2

2.2. Special tool for R410A .......................................................................................... 2

2.3. Accessories .......................................................................................................... 2

2.4. Optional parts ....................................................................................................... 3

INSTALLATION WORK .............................................................................................. 3

3.1. Selecting an installation location .......................................................................... 3

3.2. Installation dimension ........................................................................................... 3

3.3. Installation the unit ................................................................................................ 4

PIPE INSTALLATION .................................................................................................. 5

4.1. Selecting the pipe material ................................................................................... 5

4.2. Pipe requirement .................................................................................................. 5

4.3. Flare connection (pipe connection) ...................................................................... 5

4.4. Installing heat insulation ....................................................................................... 6

INSTALLING DRAIN HOSE ........................................................................................ 7

ELECTRICAL WIRING ................................................................................................ 7

6.1. Electrical requirement ........................................................................................... 8

6.2. Wiring method ...................................................................................................... 8

6.3. Unit wiring ............................................................................................................. 9

6.4. Connection of wiring .......................................................................................... 10

6.5. External input and external output (Optional parts) ............................................ 10

FIELD SETTING ........................................................................................................ 12

7.1. Setting the address ............................................................................................. 12

7.2. Custom code setting ........................................................................................... 13

7.3. Function setting .................................................................................................. 14

MOUNT THE COVER PLATE AND THE INTAKE GRILLE ...................................... 15

8.1. Handling for the pipe take-off part ...................................................................... 15

8.2. Mount the cover plate (Right) ............................................................................. 15

8.3. Mount the cover plate (Left) ................................................................................ 15

8.4. Mount the intake grille ........................................................................................ 15

TEST RUN ................................................................................................................. 16

9.1. Test run using PCB (Outdoor unit) ...................................................................... 16

9.2. Test run using remote controller ......................................................................... 16

10. CHECK LIST ............................................................................................................. 16

11. ERROR CODES ........................................................................................................ 16

1. SAFETY PRECAUTIONS

1.1. IMPORTANT! Please read before starting

This air conditioning system meets strict safety and operating standards.

As the installer or service person, it is an important part of your job to install or service the

system so it operates safely and efﬁ ciently.

For safe installation and trouble-free operation, you must:

• Carefully read this instruction booklet before beginning.

• Follow each installation or repair step exactly as shown.

• Observe all local, state, and national electrical codes.

• Pay close attention to all danger, warning, and caution notices given in this manual.

WARNING:

This symbol refers to a hazard or unsafe practice which can result

in severe personal injury or death.

This symbol refers to a hazard or unsafe practice which can result

CAUTION:

in personal injury and the potential for product or property damage.

• Hazard alerting symbols

Electrical

Safety/alert

En-1

If Necessary, Get Help

These instructions are all you need for most installation sites and maintenance conditions.

If you require help for a special problem, contact our sales/service outlet or your certiﬁ ed

dealer for additional instructions.

In Case of Improper Installation

The manufacturer shall in no way be responsible for improper installation or maintenance

service, including failure to follow the instructions in this document.

1.2. SPECIAL PRECAUTIONS

When Wiring

ELECTRICAL SHOCK CAN CAUSE SEVERE PERSONAL INJURY OR DEATH. ONLY

A QUALIFIED, EXPERIENCED ELECTRICIAN SHOULD ATTEMPT TO WIRE THIS

SYSTEM.

• Do not supply power to the unit until all wiring and tubing are completed or reconnected

and checked.

• Highly dangerous electrical voltages are used in this system. Carefully refer to the wir-

ing diagram and these instructions when wiring. Improper connections and inadequate

earthing (grounding) can cause accidental injury or death.

• Earth (Ground) the unit following local electrical codes.

• Connect all wiring tightly. Loose wiring may cause overheating at connection points and

a possible ﬁ re hazard.

When Transporting

Be careful when picking up and moving the indoor and outdoor units. Get a partner to

help, and bend your knees when lifting to reduce strain on your back. Sharp edges or thin

aluminum ﬁ ns on the air conditioner can cut your ﬁ ngers.

When Installing...

...In a Ceiling or Wall

Make sure the ceiling/wall is strong enough to hold the unit's weight. It may be necessary

to construct a strong wood or metal frame to provide added support.

...In a Room

Properly insulate any tubing run inside a room to prevent "sweating" that can cause drip-

ping and water damage to walls and ﬂ oors.

...In an Area with High Winds

Securely anchor the outdoor unit down with bolts and a metal frame. Provide a suitable air

bafﬂ e.

...In a Snowy Area (for Heat Pump-type Systems)

Install the outdoor unit on a raised platform that is higher than drifting snow.

When Connecting Refrigerant Tubing

• Keep all tubing runs as short as possible.

• Use the ﬂ are method for connecting tubing.

• Apply refrigerant lubricant to the matching surfaces of the ﬂ are and union tubes before

connecting them, then tighten the nut with a torque wrench for a leak-free connection.

• Check carefully for leaks before opening the refrigerant valves.

When Servicing

• Turn the power OFF at the main circuit breaker panel before opening the unit to check

or repair electrical parts and wiring.

• Keep your ﬁ ngers and clothing away from any moving parts.

• Clean up the site after you ﬁ nish, remembering to check that no metal scraps or bits of

wiring have been left inside the unit being serviced.

• After installation, explain correct operation to the customer, using the operating manual.

Never touch electrical components immediately after the power supply has

been turned off. Electrical shock may occur. After turning off the power, always

wait 5 minutes or more before touching electrical components.

DANGER