Dragonfly Acoustiweave DF-SL-100-AW Instructions d'assemblage et d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions d'assemblage et d'installation pour {nom_de_la_catégorie} Dragonfly Acoustiweave DF-SL-100-AW. Dragonfly Acoustiweave DF-SL-100-AW 2 pages. Fixed film screen with black velvet frame

Imprimer la page

Top Frame Bar

Side

Frame

Bar

screen

Front View

Top View

Please follow the assembly and installation instructions

carefully. With proper assembly and installation, your

new screen will deliver years of trouble-free service

Preparing your screen for installation

• Carefully open the package and lay out all the parts on a clean,

flat surface

• Use extreme caution when unpacking the screen; do not use

knives or sharp objects to open the packing boxes.

• Do not unpack the screen material at this time.

Part List

Aluminum Frame Tube

Tensioning Rod

Acoustic

Snap Lug x34 Top and Bottom Brackets x4

Scrim

Material

5x10mm Phillips

Concrete

Head Screws X8

Anchors x8

5x10mm

Corner Brackets

Screws x8

Screws x4

Top Brackets

screen

Bottom Brackets

Back View

Installing the snap lugs

• Slide the snap lugs into the section of the extruded aluminum

frame as shown in Diagram 1.

Diagram 1

Snap Lug

• The snap lugs line up with the arrow decals on the frame

tubes. Alignment is not critical at this stage of the installation.

Note that the screen is supplied with 2 extra snap lugs; should

you lose or break a snap lug, one of the spares is a convenient

replacement.

Assembling the frame

• Place all of the frame tubes face down on the work surface and

carefully line up the ends to form shape of the finished

screen.

• Slide the snap lugs into the grooves on the reverse side of the

frame and align with the arrows as shown in diagram 2.

Loosen the corner bracket, and slide the frame into the frame

grooves of the corner bracket. Align and insert corner bracket

screw for each corner bracket.

• It will help to leave the screws loose until you get all of the

brackets in place.

• Note that you may have to loosen and adjust the brackets

and frame tubes in order to get the frame perfectly square. A

carpenters square is very helpful with this stage of the

assembly.

Diagram 2

Fixing Lugs

Side

View

Aluminum corne r

connecto r piec e

Top and Bottom

Frame Pieces

Side Frame Pieces

Installing the screen material

• Make sure that hands and work area are clean before working

with the screen materials

• Carefully unpack the screen material- Use caution as the 4

tensioning rods are contained inside the cardboard tube.

• Carefully lay out the screen material so that it roughly lines

up with the frame- Exact position is not critical at this stage of

the assembly. It is important that the screen material is facing

the correct direction. It is easy to identify the back side of the

screen as it will have the stitched or welded seam visible.

• Unpack the 4 metal tensioning rods.

• Insert the long metal tensioning rods into the longer edges

of the screen material, one rod per side. It is easier if the

screen is flat on the floor. Use care when installing the rod;

do not force it or damage to the screen material may occur

(See Diagram 3).

• Insert the shorter tensioning rods into the corresponding

sides of the screen; as with the longer rods, use caution to

avoid damage to the screen (See Diagram 3).

• Line up the snap lugs and the screen material with the frame

and press the snap lug through the corresponding hole in

the material. Some adjustment and re-adjustment is often

necessary; this is normal. Note that the tensioning rod goes to

the outside of the snap lug (See Diagram 4).

• Repeat this process all the way around the frame. As you

position the tensioning rod behind the snap lugs,

the screen will become tighter on the frame and any

wrinkles or creases will disappear. It may also be helpful or

necessary to temporarily "unsnap" or loosen the snap lug for

adjustment, especially as you work to the final corners of the

screen.

Diagram 3

Tension Rod

Diagram 4

• Once the screen is in place and the tensioning rods are

seated behind all of the snap lugs, inspect the front

of the screen. Make sure that the screen material is flat

and wrinkle-free. Also, check the corners to make sure that

the screen is properly positioned. If there are any wrinkles

or positioning issues, simply lay the screen face down and

adjust accordingly.

• Note that some very small fold lines or wrinkles may exist

for a few hours; this is due to the packing of the screen and

they will disappear within a short time.

Mounting the screen onto the wall

• Select an appropriate area to mount the screen. Make sure the

position selected will not interfere with existing features of

your room; wall sockets, switches, etc... these all should be

avoided.

• DO NOT install the screen over an electrical outlet or switch.

Doing so poses a serious fire hazard.

• For homes with stud-wall construction, use stud finder or

carefully measure to determine where the studs are located in

the wall. The screen MUST be mounted to the studs- NEVER

rely on gypsum board, drywall, or thin wall materials to

support the weight of the screen!

Rev: 140919-1655