Electrolux WTB2500 Manuel d'installation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Electrolux WTB2500. Electrolux WTB2500 16 pages. Ik007 integration kit refrigeration
Également pour Electrolux WTB2500 : Manuel d'installation (16 pages)
Imprimer la page
- 1. Table of Contents
- 2. Before You Call
- 3. General Warnings
- 4. Refrigerator Integration Kit Items
- 5. Cupboard Dimensions
- 6. Installation of 120˚ Hinge
- 7. Preparation
- 8. Attaching Top Hinge Bracket
- 9. Attaching Slide-Housing to Refrigerator Doors
- 10. Placing Refrigerator in Cupboard
- 11. Refrigerator Alignment
- 12. Attaching Slide-Bar to Cupboard Door
12
PlaCIng REFRIgERaToR In CuPBoaRd
1. Ensure cupboard is level and square.
2. Put refrigerator into cupboard. use caution and
two people if necessary.
3. Insert slide bars into slide-housings (Figure 7).
NOTE: Ensure the refrigerator is level in the cupboard.
Raise the front of the refrigerator by using the height
adjusting screws.
Figure 7
Figure 9
87mm
Figure 10
Figure 10a
Plastic roller nut
Location bracket
Cupboard floor
For WTB2300 & WTB2500
REFRIgERaToR alIgnMEnT
Position the refrigerator in the cupboard so that:
1. Top hinge bracket is against cupboard wall (Figure 8).
2. Front of refrigerator cabinet (with doors open) is parallel
to and approximately 87mm from the front of the
cupboard (Figure 9. Figure 9a for selected models
only).
3. Position bottom location bracket as shown (opposite
hinge side Figure 10). Fit adjustable foot in appropriate
hole as shown and level refrigerator. (Figure 10a & 10b
for selected models only.)
NOTE: Do not screw in place yet.
NOTE: The front adjustable rollers may need raising (rotate
anti-clockwise when viewed from above) to achieve this.
Figure 8
Fridge
Top hinge Bracket fitted – note the space between
the cupboard and the side of the refrigerator is to be
approximately 74mm.
Figure 9a
87mm
For WTB2300 & WTB2500
Figure 10b
For WTB2800, WTB3400 & WTB3700
74mm