Dramm Rain Pro Expandable Manuel d'installation et de programmation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et de programmation pour {nom_de_la_catégorie} Dramm Rain Pro Expandable. Dramm Rain Pro Expandable 20 pages. Expandable controller 3, 7, 11, 15 stations

Imprimer la page

1. Trouble Shooting Guide

Interval Day allows you to choose to irrigate at an interval

ranging from every day (1), every second day (2), up to

every 31

day (31). "Days left" indicates the number of days

remaining until the next scheduled irrigation cycle will occur

for that specific program. As an example, if 2 is the "interval"

and 1 is the "Days Left," irrigation will occur tomorrow.

1. Push the → button when the cursor is on Sunday.

This will change the program to an "Interval Day"

schedule.

2. Push the + button to increment the "Interval"

indicating the desired number of days from 2 – 31

days between irrigation cycles.

3. Next, push the → button and the number of "Days

Left" will flash. Use the + or – buttons to choose the

number of days until you desire this irrigation cycle to

start. Number of "Days Left" will not exceed the

"Interval" schedule selected.

4. Rotate dial to "Run" to enter this data in controller.

UTILIZING "ODD OR EVEN" DAY SCHEDULING

"Odd" or "Even" day scheduling is typically used to comply

with regulatory watering rules. ODD/EVEN scheduling allows

you to irrigate on only "ODD" numbered or "EVEN"

numbered days of the month.

1. Follow

the

instructions above utilizing steps 1 and 2 and set the

"Interval Day" to 1.

2. Push the → button to highlight option not desired

ODD or EVEN.

3. Push the – button to eliminate either the ODD or

EVEN schedule as a "No Water Days." A circle will

appear above the eliminated choice. If EVEN is

"Interval

Day"

watering

schedule