Bosch 2 Manuel de démarrage rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Bosch 2. Bosch 2 9 pages. Mini blender
Également pour Bosch 2 : Manuel d'installation rapide (16 pages), Manuel d'installation et d'utilisation (18 pages), Manuel d'instructions original (13 pages), Manuel d'instructions original (22 pages), Manuel d'instruction (32 pages), Manuel de l'utilisateur (28 pages), Manuel de l'utilisateur et instructions d'installation (16 pages), Manuel d'instruction (42 pages), Manuel d'utilisation (8 pages), Manuel d'instruction (8 pages), Manuel d'instruction (12 pages), Manuel de démarrage rapide (2 pages), Manuel d'instruction et instructions d'installation (36 pages), Manuel de l'utilisateur et instructions d'installation (48 pages), Manuel d'utilisation (26 pages), Manuel de référence rapide (2 pages), Manuel de l'utilisateur et instructions d'installation (24 pages), Manuel d'instruction (42 pages), Informations pour l'utilisation (28 pages), Manuel de l'utilisateur (40 pages), Manuel de l'utilisateur et instructions d'installation (35 pages), Manuel de l'utilisateur (24 pages)

Imprimer la page
Bosch 2 Manuel de démarrage rapide
Electric straight screwdriver with lever start
Rated current
No-load speed
Maximum torque, hard/soft screwdriving application according to ISO 5393
Direction of rotation
Marking ring
Max. screw diameter
Weight according to EPTA-Procedure 01:2014
Protection rating

Noise/Vibration Information

Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted sound pressure level of the power
tool is 70 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2:
2
Screwdriving: a
 < 2.5 m/s
, K = 1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Disconnect the power supply before adjusting the tool
u
settings, changing accessories or storing the power
tool. This safety measure prevents the power tool from
being started accidentally.
Operating and storage conditions
The power tool is suitable only for operation at enclosed
work sites.
Bosch Power Tools
To ensure smooth operation, the permitted ambient temper-
ature should be between -5 °C and +50 °C (23 °F and 122
°F), at a permitted relative humidity of between 20% and
95%, free of condensation.
The electric straight screwdriver should be stored at a tem-
perature of between -20 °C (-4 °F) and 70 °C (158 °F) in or-
der to prevent damage to the electronics.
Suspension device
You can use the hanging hook (8) to attach the power tool to
2
.
a suspension device.
Regularly check the condition of the hanging hook and
u
the catch in the suspension device.
Changing the tool
Inserting the application tool
Pull the quick-change chuck (3) forwards. Insert the applica-
tion tool (1) into the tool holder (2) and release the quick-
change chuck again.
Only use application tools with a matching shank (1/4"
hexagon).
When fitting an application tool, make sure that it is
u
held securely in the tool holder. If the application tool is
not held securely in the tool holder, it may become loose
and consequently uncontrollable.
Removing the application tool
Pull the quick-change chuck (3) forwards. Take the applica-
tion tool (1) out of the tool holder (2) and release the quick-
change chuck again.
Connecting to the power supply (see figures A–
B)
The power tool is supplied without a power supply unit. The
PUC-EXACT power supply unit is required to connect the
tool to the power supply.
The PUC-EXACT power supply unit must only be used
u
with the power tools that are intended for it. Using the
PUC-EXACT with other electric tools may damage the unit
and these tools.
English | 17
C-EXACT 6
C-EXACT 6
A
1.0
rpm
1000
Nm
1.0 – 6.0
1.0 – 6.0
in lbs
8.9 – 53.1
8.9 – 53.1
black
black
M 5
kg
0.87
0.87
lbs
1.4
IP 20
IP 20
1 609 92A 6L4 | (18.05.2021)
1.0
500
M 5
1.4