Bosch 300 Series Manuel d'utilisation et d'entretien / Instructions d'installation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'entretien / Instructions d'installation pour {nom_de_la_catégorie} Bosch 300 Series. Bosch 300 Series 40 pages. Built-in wall ovens
Également pour Bosch 300 Series : Manuel d'utilisation (40 pages), Manuel de l'utilisateur (21 pages), Manuel d'installation (6 pages), Manuel d'installation (36 pages), Manuel d'installation (32 pages), Manuel d'utilisation (50 pages), Manuel de démarrage rapide et de sécurité (7 pages), Manuel d'installation (28 pages), Manuel de démarrage rapide (7 pages), Manuel d'utilisation et d'entretien (32 pages), Manuel de démarrage rapide et de sécurité (7 pages), Manuel d'entretien (36 pages), Manuel de démarrage rapide et de sécurité (13 pages)

Bosch 300 Series Manuel d'utilisation et d'entretien / Instructions d'installation

Loading the laundry

WARNING
9
RISK OF EXPLOSION
Do not dry laundry that has ever been in contact
with solvents, oil, wax, grease or paint (e.g. hair
styling products, nail varnish remover, stain
remover, cleaning solvent, etc.).
Check lint filter.
1.
The filter should be cleaned after or before every
drying process. Cleaning the filter reduces the drying
time and saves energy.
Load the laundry into the drum and close the door.
2.
Tip: If the door has not been closed properly, the dryer
will not start.
Tips
After loading, close the door carefully so as not to trap
any items between the door and the rubber seal. The
door should close until a click is heard.
Foreign objects left in the drum may damage laundry.
Before inserting any laundry, check to make sure no
foreign objects are in the drum.
Recommended Load Size
Recommended maximum load size can be found in the
program selection table in this manual.
22
Load the laundry
Place laundry in the empty drum. Put each piece of
laundry into machine separately.
For best results the laundry to be dried must be sorted
according to type of laundry and desired degree of
drying.
~ Program selection table; Page 26
~ Dry Level; Page 27

Starting the program

Rotate program selector to the desired program.
1.
Select the program which corresponds to the laundry
in the dryer from Program selection table.
The Start/Pause indicator light starts flashing.
Touch the Start/Pause button. Indicator lamp lights up
2.
and the cycle starts.
During the cycle, the display area indicates the
estimated remaining time and symbols showing the
cycle progress are lit.
NOTICES
If you want to protect the cycle against inadvertent
adjustment, select the Childproof lock.
~ Childproof lock; Page 23
If
indicator lights up, clean the lint filter and/or
é
heat exchanger.
If DR indicator lights up, check the drain hose and
its connection.