Bosch FAP-OC 500Series Manuel d'utilisation et d'entretien / Instructions d'installation - Page 15

Position hoses as shown when routing hoses to left side

of washer (facing from front).

About the AquaShield® Hose

The AquaShield® hose prevents potential flooding in the

event the hose develops an internal leak. If the hose

leaks, the indicator turns red and water flow is blocked.

Once the internal valve in the hose activates (indicator is

red) the hose must be discarded. Contact customer

service for a replacement.

Water drain hose connection

NOTICES

Do not reuse an old drain hose. Only use the drain

▯

hose and parts included with your washer.

Do not kink or modify the water drain hose.

▯

Height of drain point

Height difference between the floor and drainage point:

max. 39 in. (100 cm).

Types of drainage hookups

Standpipe

Attach the drain hose to the elbow included with your

washer.

Position the elbow on the drain hose 4" from end of hose

as shown. Insert this section of the drain hose into the

drain pipe. Secure the elbow and hose with a nylon tie

strap or the equivalent to keep the hose from coming out

of the drain pipe during use.

Sink siphon

Secure the drain hose to the sink siphon using a Ø 0.9 -

1.6 in. (20-44 mm) hose clip (available from a hardware

store).