Draper 220V Envoy Instructions d'installation et d'utilisation - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'utilisation pour {nom_de_la_catégorie} Draper 220V Envoy. Draper 220V Envoy 2 pages. Electric projection screen
Imprimer la page
220V Envoy by Draper
198 mm
192 mm
3 mm
192
mm
Standard
Construction
Please Note: Do not wire motors in parallel.
Single Station Control
CE Approved
Junction box at
left end of screen
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green/Yellow (Motor Ground)
Control
switch
Dashed wiring
by installer
220v,
50 Hz.
Case Dimensions and Wiring Diagrams
Incl. mtg.
brackets
Support rods
103
by others
mm
57
Mounting
brackets
mm
Surrounding
ceiling
Offset
Construction
Multiple Station Control
Junction box at
left end of screen
Red
Black
Red
Black
Red
Black
220v, 50 Hz.
Low Voltage and Remote Control
White or Blue-Common to screen & 110/220V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110/220V AC-Hot
Black-to 110/220V AC-Hot
Green(Ground)
Dashed wiring by electrician
Low voltage wiring by others
Eye Port for IR Eye, RF Receiver or LED
Wall Switch. For more than one of
these, a splitter is required.
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Aux Port for connecting additional LVC-III
modules (up to six total can be linked-
connect from Aux to Eye).
www.draperinc.com
51
mm
16
mm
32
Viewing
191
mm
mm
surface
Conduit connection
51mm up on this end
Wiring Diagrams
Not CE Approved
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green/Yellow (Motor Ground)
Cap off with wire
nut & tape
Blue
Blue
Blue
Dashed wiring
by installer
Internal Screen Wiring
White/Blue (Common)
Red 110/Black 220 (Up)
Black 110/Brown 220 (Down)
Green 110V/
Green/Yellow 220V
(Motor Ground)
STOP
Location of key
operated on-off
switch if furnished
STOP
Control
Switches
24v DC
(765) 987-7999
Fabric Width + 381 mm
Ceiling
closure door
See separate Serial Communication-
RS232 Instruction sheet for enabling
RS232 with the MC1.
To
110/220V
Line
Page 2 of 2
51
mm
192
mm
83 mm
Ceiling grid and
tile (by others)
MC1