Draper MC1 Manuel d'instructions - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Draper MC1. Draper MC1 18 pages. Low voltage, remote control, serial and network wiring
Également pour Draper MC1 : Brochure (16 pages), Manuel de câblage (8 pages)

Imprimer la page

PREPARING THE CHARGER

8.1 INSTALLATION

1. When selecting a suitable location to use this charger be sure to choose a clean, dry and

tidy location.

2. Ensure that the charger can be placed in a stable position and that there is ample room

next to the charger for the battery to be located.

3. Ensure that the charger is in good working condition before each use. Any damage or

defects should be rectified immediately, the charger should not be used if there is any

damage to the charger or it's cables.

4. Once you have carried out the inspection listed above and satisfied yourself that the

charger is in good condition and safe to use, connect the battery connection clamps to

the batteries terminals being careful to ensure that the correct polarity is observed

(Red + Black-).

5. Plug in the charger to the mains power supply. You are now ready to set up the charger

for your chosen battery.