Draper Paragon Large Electrically Operated Projection Screen Spécifications

Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} Draper Paragon Large Electrically Operated Projection Screen. Draper Paragon Large Electrically Operated Projection Screen 2 pages. Large electrically operated projection screen with motor–in–roller

Imprimer la page
Draper Paragon Large Electrically Operated Projection Screen Spécifications
Paragon
Specifi cations—Paragon
projection screens, size
electrically operated 110-120v AC 60 Hz. 3-wire motor mounted inside
screen roller, 2.5 amp draw, instantly reversible, lifetime lubricated,
with internal thermal overload protector and mechanical brake. Motor
mounted with sound-absorbing fi xtures. Left hand motor location only.
Preset, accessible limit switches. J-box inside case accessible via 22
ga. steel cover plate. Entire roller and drive assembly easily removable
through bottom of case.
Roller to be 6" OD x
1
/
" wall steel tube. Roller brackets to be painted
8
white and to have double row radial ball bearings. Viewing surface to
be ([GREENGUARD for Children and Schools certifi ed Matt White]
[Glass Beaded]), fl ame and mildew resistant. Matt White and High
Contrast Grey viewing surfaces shall qualify as low emitting and
meet all of the requirements of the GREENGUARD for Children and
Schools and GREENGUARD certifi cation program, which are: emissions of total volatile
3
organic compounds < 0.22 mg/m
, formaldehyde < 0.0135 ppm, total aldehydes < 0.043
ppm, individual volatile organic compounds < 1/1000 TLV and < ½ chronic REL and
total phthalates < 0.01 mg/m
3
. Dowel shall be 1½" OD steel tube with black polyethylene
endcaps.
Case constructed of extruded aluminum. Bottom of case fully enclosed except for slot
allowing fabric passage. Bottom closure panel shall be extruded aluminum, fi nished white,
and may be removed manually for access to roller and drive unit. Closure panel shall be
held in place by screw and bracket at each end of case. Aluminum endplates with integrated
steel brackets for suspended mounting shall be fastened to extruded case with thread-
cutting screws. Eyebolts shall be provided for use in hoisting screen. Case support brackets
shall be welded steel channel, riveted to exterior of case.
Three-position control switch (or switches—specify number) shall stop or reverse screen at
any point. Controls to be furnished complete with cover plate.
Entire unit certifi ed by Underwriters' Laboratories, Inc. for the U.S. and Canada. Suitable
for use in environmental air space in accordance with Section 300-22 (c) of the National
Electrical Code, and Sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical
Code, Part 1, CSA C22.1. U.S. Patent No. 6,873,461.
Options:
Wall Mount Bracket Kit: Kit includes two structural steel brackets and hardware to attach
brackets to case. Hardware for mounting to wall structure by others.
Endcap Ceiling Tile Flange Kit: Extruded aluminum, fi nished white. Attaches to endcaps.
Each kit contains two (2) fl ange pieces and hardware for attaching trim fl anges to endcaps.
Ceiling Tile Flange for Front of Case: Each kit includes 12' extruded aluminum, fi nished
white. Attaches to front of case. Hardware for attachment to case included.
Downloadable 3-part specifi cations are available at www.draperinc.com.
Please Mark Appropriate Selections
Select Viewing Surface:
Matt White
Glass Beaded
Optional Accessories:
Extra Screen Drop (Total screen height cannot exceed 24')
Same color as viewing surface (standard on AV format screens)
Black (standard on all other formats)
Length of total drop
Black Masking Borders (Optional on AV format, standard on all others)
Wall Mount Bracket Kit (Includes two brackets)
Endcap Ceiling Tile Flange Kit (2 per kit)
Ceiling Tile Flange for front and/or rear of case (12' lengths)
How many 12' lengths do you need?
Control Options:
Please Note: This Draper motorized screen comes with one 110V-120V AC
3-position wall switch (silver wall plate with black rocker)
Total number of 110-120V AC switches (switches operate independently)
Substitute white switch(es) for silver wall plate with black rocker
Serial or Network Communication (Complete Serial & Network Control Planning Sheet)
Optional Low Voltage Control Module (LVC-III)
24 Volt 3-Button Switch
Radio Frequency Remote Control (only with 24v)
Infrared Remote Control (only with 24v)
Optional Key Operated Switch
Power Supply Key Switch (On-off)
3-Position Key Control
3-Position Switch with Hinged Key-Locking Coverplate
Optional Video Interface Control
VIC-115
Override Switch
VIC-12
Override Switch
VIC-6
Override Switch
®
Copyright © 2008 Draper Inc. Form Paragon_Sub08-R
Large Electrically Operated Projection Screen
With Motor–In–Roller
h. x
w.,
EcoVision
Part of the Draper
EcoVision™ range
of products
Number of 24V switches:
(VICs are compatible only with the
Override Switch, and not with any
other wall switches or controls)
Printed in U.S.A.
Dimensions & Data
Size
H x W
AV Format
15' x 20'
20' x 20'
11' x 22'
16½' x 22'
22' x 22'
12' x 24'
18' x 24'
24' x 24'
13' x 26'
19½' x 26'
14' x 28'
21' x 28'
Nominal
Image
Diagonal
Area H x W
4:3 NTSC Video Format
25'
177" x 236"
27½'
194" x 260"
30'
212" x 284"
32½'
230" x 308"
35'
248" x 332"
16:9 HDTV Video Format
270"
133" x 236"
300"
146" x 260"
324"
160" x 284"
354"
173" x 308"
384"
187" x 332"
Custom Size
Case Dimensions 13¼" high x 12" deep. Optional wall mounting brackets extend
1¾" beyond each end of case (hole centers are 1" from end of case).
Paragons with cases longer than 300" require special handling.
rod (for suspending
screen) by others.
3
/
" -16 threaded rod
8
(use for adjusting
deflection in extremely
long units) by others.
8"
1
13
/
"
4
Knockouts for electrical connections
12"
(two per end) with plastic plugs*
*Left hand motor location only on Paragon
Please see back page for dimensional diagrams of case and
optional wall mounting bracket
PROJECT:
ARCHITECT:
CONTRACTOR:
SUPPLIER:
DATE:
by
Case
Net Wt.
Length
(Lbs.)
250"
440
250"
450
274"
484
274"
494
274"
504
298"
528
298"
538
298"
548
322"
572
322"
582
346"
616
346"
626
Overall
Case
Net Wt.
Size
Length
(lbs.)
182" x 240"
250"
440
199" x 264"
274"
484
217" x 288"
298"
528
235" x 312"
322"
572
253" x 336"
346"
616
138" x 240"
250"
440
151" x 264"
274"
484
165" x 288"
298"
528
178" x 312"
322"
572
192" x 336"
346"
616
1
/
" threaded
2
Eyebolts for hoisting screen
(do not lift screen by center of case).
Case support brackets.
REVISED:
Qty.
Qty.