Draper Signature Series E Instructions d'installation et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'utilisation pour {nom_de_la_catégorie} Draper Signature Series E. Draper Signature Series E 3 pages.

Signature/Series E & V by Draper
Single Station Control
Location of key
operated on-off
switch if furnished
To 110-120V Line
Please Note: Do not wire motors in parallel.
Single Station Control
Internal Screen Wiring
Internal Screen Wiring
White (Common)
White (Common)
Black (Down)
Black (Down)
Red (Up)
Red (Up)
Green (Ground)
Green (Ground)
Dashed wiring
Dashed wiring
by electrician
by electrician
Control
Control
Single gang box by others
Single gang box by others
switch
Min. 4" x 2
switch
1
/
Min. 4" x 2
" x 1
7
/
8
8
Blue
Blue
Red
Red
Black
Black
Location of key
operated on-off
switch if furnished
To 110-120V Line
Low Voltage & Wireless Control
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Two-Way Serial Communication (RS232) with MC1
White-Common to screen & 110-120V AC Neutral
Red-to Screen (directional)
Brown-to Screen (directional)
Black-Hot to 110-120V AC
Program LED
Green/Yellow-Ground
Fuse
RS232 Data FROM Control System
RS232 Data TO Control System
Signal Ground & Manual Switch Common
Manual Switch Down
Manual Switch Up
Eye Port for IR Eye. For RF Receiver or LED
MC1
Wall Switch, a Splitter and a Power Supply
is required. Plug RF Receiver or LED Wall
Switch and Power Supply into splitter, then
run cable from Splitter to MC1 Eye Port.
www.draperinc.com
Wiring Diagrams
Multiple Station Control
Multiple Station Control
Red
" deep
1
/
" x 1
7
/
" deep
8
8
Black
Red
Black
Red
Black
Location of key
Location of key
operated on-off
operated on-off
switch if furnished
switch if furnished
To 110-120V Line
To 110-120V Line
White-Common to screen & 110-120V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110-120V AC-Hot
Black-to 110-120V AC-Hot
Green-Ground
Dashed wiring by electrician
Low voltage wiring by others
Eye Port for IR Eye, RF Receiver or LED
Wall Switch. For more than one of
these, a splitter is required.
Aux Port for connecting additional LVC-III
modules (up to six total can be linked-
connect from Aux to Eye).
Low Voltage Wiring by others
AC Wiring by electrician
(765) 987-7999
Internal Screen Wiring
Internal Screen Wiring
White (Common)
White (Common)
Black (Down)
Black (Down)
Red (Up)
Red (Up)
Green (Ground)
Green (Ground)
Cap off with wire
Cap off with wire
nut and tape
nut and tape
Red
Blue
Blue
Dashed wiring
Dashed wiring
Black
by electrician
by electrician
Red
Blue
Blue
Black
Red
Blue
Blue
Single gang box by others
Single gang box by others
Black
1
7
1
7
Min. 4" x 2
/
Min. 4" x 2
" x 1
/
" deep.
/
" x 1
8
8
8
3 shown. More or less equally
3 shown. More or less equally
feasible.
feasible.
Internal Screen Wiring
White (Common)
Red (Up)
Black (Down)
Green (Ground)
To
110-120V
Line
STOP
Location of key
operated on-off
switch if furnished
STOP
Control
Switches
24v DC
Internal Screen Wiring
White (Common)
Red (Up)
Black (Down)
Green (Ground)
To
110-120V
Line
STOP
Location of key
operated on-off
switch if furnished
STOP
Control
Switches
See separate Serial Communica-
24v DC
tion-RS232 Instruction sheet for
enabling RS232 with the MC1.
Page 3 of 3
/
" deep.
8