Bosch WAE1826KBC Manuel d'instructions pour l'installation et l'utilisation - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour l'installation et l'utilisation pour {nom_de_la_catégorie} Bosch WAE1826KBC. Bosch WAE1826KBC 20 pages. Front-loading washing machine

Imprimer la page
Extra function and start buttons
Rinse plus K:
an extra rinse cycle is performed.
Start
:
M
To start/pause the wash cycle. A
programme must previously have been selected.
Screen (pic. 5 - 8)
The screen shows the information that has to be
indicated in some cases before the programme
is started, such as the time remaining, the wash
temperature or the spin speed, etc. Once the
programme has started, the time remaining is
ö
shown; 
" will be shown when the
programme has finished; is ò" (
spin
) is selected, ò" will appear to remind us
that there is still water in the washing machine.
Spin B": Press this button to select the required
spin speed. With the extra function
spin
ò".
Spin speed
Rpm
(depending on model) Programme
1400 / 1200 / 1000
800 / 800 / 800
800 / 800 / 800
600 / 600 / 600
800 / 800 / 800
800 / 800 / 800
800 / 800 / 800
! If during the wash, the B button is pressed
once briefly, the selected speed is shown; if
it is pressed repeatedly, the selection is
modified (bear in mind that following the final
spin the new value will have no effect).
Temperature O": Press this button to select the
wash temperature required for the selected
programme (see Programme selector" table).
! If during the wash, the O button is pressed
once briefly, the selected temperature is
shown; if it is pressed repeatedly, the
selection is modified (bear in mind that when
the temperature has reached the required
level, the new value will have no effect).
10 en
without final
without final
Cottons
y
Easy-care A
Mixed Load
zx
Delicates q
Wool U u
Rinse
r
4
Spin
! For safety reasons, the machine does not
start until the door is properly closed.
Time W": The start time may be adjusted
between 0 and 24 hours. The time will be
cancelled when the button is pressed once
more. The programme will begin automatically at
the time programmed.
Time remaining
When
the
programme
approximate duration will be shown.
m Set the programme selector control to the
desired programme. The warning light
start
d
-washQ
«
shows the time remaining (programme
duration), for instance 1:18 = 1 hour and 18
minutes..
At the end of the programme 
without final spin
.
the screen
If ò" (
selected, ò" appears when the programme is
finished.
! While the programme is running, its duration
may increase or decrease due to the
following:
Time increase
:
- extra rinse cycle if the laundry has too much
foam,
- multiple spin if the laundry is not well distrib
uted around the drum,
- increase in heating time if, for instance, the
water is too cold,
- excessively low water pressure,
- selection of an extra option,
- highly absorbent laundry.
Time decrease
:
- light loads,
- decrease in heating time if, for instance, the
temperature of the water is very warm.
is
selected,
» flashes. The screen
ö
" appears on
) has been
its