Bosch WAE20060UC Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Bosch WAE20060UC. Bosch WAE20060UC 8 pages. Machine à laver
Également pour Bosch WAE20060UC : Manuel d'instructions d'installation (6 pages), (Instructions d'installation (6 pages), (Français) Instructions D'installation (6 pages)

Bosch WAE20060UC Manuel d'instruction
Before washing for the first time
run a cleaning cycle with no laundry in the drum
Sorting and loading laundry
Follow care instructions of the manufacturer.
According to the care instructions tag.
Sort laundry according to type, colour, soiling and temperature.
Do not exceed the maximum load.
Pay attention to important information!
Fill with large and small items of laundry! Close loading door.
Do not catch pieces of laundry between the door
Add detergent and laundry additives
Washing amount, soiling, water hardness (ask your water supply
company) and manufacturer's instructions. Pour liquid detergent
into the appropriate dispenser and place in the drum.
ser I: Do not use!
r
: Fabric softener, starch
Detergent for main wash, water softener, spot remover.
old be thinned with water.
detergents.

Set and adjust cycle

For additional functions and option
buttons see individual settings
rogramme selector
page 5.
page 5, 6!
and the rubber seal.
Meter accordingly:
1
page 5.
Cycle selector
for turning on and off
the machine and for
selecting the cycle.
Possible to turn
in both directions.
2
Select Start

Washing

Detergent drawer with
dispensers I, II,
Loading door
Control panel
Door handle
Service door
Washing
3
Removing laundry
Open washing machine door and remove laundry.
Remove any existing foreign objects
Close water faucets
Switch off
Set cycle selector to Off.
End of programme when ...
... indicator light Spin flashes.
Change cycle ...
If you have mistakenly selected a wrong cycle:
– Reset cycle.
3
– Select Start within 3 seconds or the washer will
automatically start the draining the drum.
Restart immediately after new programme
selection to avoid draining phase.
... or stop cycle
For cycles with high temperature:
– Cool down wash: Select Refresh.
– Select Start.
For cycles with lower temperature:
– Select Spin or Drain.
– Select Start.
Risk of rust.
4