Bosch WAE20060UC/23 Instructions d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Bosch WAE20060UC/23. Bosch WAE20060UC/23 5 pages.
Également pour Bosch WAE20060UC/23 : Manuel (6 pages)
Imprimer la page
Strong odor. vibrations and "walking" can be the result of incorrect leveling!
Loosen counter nut with wrench counterclockwise.
Change height by rotating the appliance feet.
Attention:All
four appliance feet must be firmly on the floor.
The washing machine must not wobble!
Check alignment of the washing machine with a bubble level and, if required,
correct.
Tighten the counter nut against the housing.
Hold the feet while doing this and do not change the height.
Attention:
The counter nuts of all four washer feet must be screwed tightly
against the housing'
Make sure that:
- the power Iqlug fits into the socket.
_ the wire size is sufficient.
-- the grounding system is properly installed.
The ROwercord may be re_laced bY an electrician OnlYl Replacement power cords are available
from Customer Service. To reduce the risk of fire or electrical shock, DO NOT use an extension
cord or an adapter to connect the washing machine to the power supply.
Use of a Ground Fault Circuit Interrupter (GFCI) is recommended,
EleCtriCal p lug:
-do
not insert!pull out of the socket with damp hands.
Cdo not p, u l! the plug out of the socket by tugging the iqower cord.
- never pull out the plug while the alqpliance is operating.
Release the water pressure in the supply hose.
-> operating instructions, page 9; Filter in the water SUPlqly.
Drain any residual detergent solution.
-> operating instructions, page 9; Detergent solution pumA.
Isolate the washing machine from the power SUplqly.
Z_ WARNING
This appliance must be grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electrical shock by providing a path of least resistance for the electric current.
This appliance features a cord with an equipment-grounding
conductor and a grounding plug.
The plug must be plugged into an appropriate outlet which has been properly installed and
grounded in accordance with all local regulations and ordinances.
Improper connection of the equipment grounding conductor may result in electric shock. Have
the appliance checked by a qualified electrician or service technician if you are in doubt as to
whether the washer has been properly grounded.
Do sot modify the plug provided with the appliance - if it will not fit in the outlet, have a proper
outlet installed by a qualified electrician.
The washing machine must only be connected to an individual branch circuit via a socket
which qas been properly installed and grounded,
The household electrical voltage must correspond to the voltage slqecifications on the washing
machine.
Connection specifications as well as the required fuses are stipulated on the appliance rating
plate.
Volts
Hertz Amperes
208-240
60
10
Manufacturer (see Operating instructions)
1109
9000 484 651
!lil!