Bosch WAE24167GB Manuel d'instruction et instructions d'installation - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et instructions d'installation pour {nom_de_la_catégorie} Bosch WAE24167GB. Bosch WAE24167GB 32 pages.
Imprimer la page
Press the Start button again. The
3.
Rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end during
$ Rinse Stop
The $ Rinse Stop and ' Rinse
indicator lights light up and the indicator
lamp for the Start button flashes.
To end the programme:
Select the Spin or Empty
1.
programme.
Press the Start button.
2.
Programme end
The f Ready indicator light lights up
and the indicator light for the Start
button flashes.
If the N Wash indicator light also
flashes, the washing machine has
detected too much foam during the
wash programme and automatically
switches on a rinse cycle to remove the
foam.
Add less detergent to the next
Note:
washing cycle with the same load.
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
If you cannot open the
Note:
washing machine door, the
appliance is still locked. Wait until
the programme has ended.
Set the programme selector to the
2.
Off position. The appliance is
switched off.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Scope of delivery ~ Page 25
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
Leave the washing machine door
■
and detergent drawer open so that
any residual water can evaporate.
Always remove the laundry.
■
Always wait until the programme has
■
ended, as the appliance could still
be locked.
H
Sensors
A utomatic load sensing
S e n s o r s
The automatic load sensing function
optimally adjusts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Sensors
en
17