Bosch WAE24280MY Manuel d'instruction et instructions d'installation - Page 28
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et instructions d'installation pour {nom_de_la_catégorie} Bosch WAE24280MY. Bosch WAE24280MY 32 pages.
Imprimer la page
Installation and connection
en
Removing the transport bolts
Caution!
The appliance may be damaged!
Transport bolts which have not been
removed may damage the drum or
other components while the washing
machine is running. Before using the
appliance for the first time, make sure
that all four transport bolts are
completely removed. Keep the bolts in a
safe place.
Caution!
The appliance may be damaged!
To prevent damage in transit when
transporting the appliance at a later
date, always re-install the transport bolts
prior to transportation.
To avoid injury, take care when
Note:
handling these.
Use a spanner to loosen all fixing
1.
bolts until they turn freely.
All four parts will fall to the floor
2.
when you tip the machine.
Insert the covers which you will find
3.
in the bag containing the
documentation.
28
Water supply
:
Warning
Danger of death from electric shock!
Danger of death if live parts are
touched.
Notes
To prevent leakage or water
■
damage, follow the instructions in
this section!
Operate the machine with cold
■
drinking water only. Do not connect
to the mixer tap of an unpressurised
hot-water apparatus.
Do not remove the water inlet hose
■
frequently as the loose connection
will lead to leaks. We recommend
that you use a water inlet hose that is
specially made for the machine.
Use only the supplied inlet hose or a
■
new one purchased from an
authorised specialist retailer, not a
used one!
If in doubt, have the appliance
■
connected by a technician.
Water inlet hose: do not kink,
Note:
crush, modify or sever (its strength is no
longer guaranteed).
Optimum water pressure in the mains:
100-1000 kPa (1-10 bar)
When the tap is turned on, the water
■
flow is at least 8 l/min.
If the water pressure is higher, install
■
a pressure reducing valve.
Connect the water inlet hose (_" =
1.
26.4mm).
:
Warning
The threads for the screw
connections may be damaged!
If the screw connections are
tightened too tightly using a tool
(pliers), the threads may be
damaged.
Tighten plastic screw-fittings by hand
only.