Bosch WAG14060IN Instructions d'utilisation et d'installation - Page 27
Parcourez en ligne ou téléchargez le pdf Instructions d'utilisation et d'installation pour {nom_de_la_catégorie} Bosch WAG14060IN. Bosch WAG14060IN 43 pages.
Imprimer la page
Cleaning water inlet
strainers
Cleaning the strainer at the
water tap
Cleaning the strainer on the
washing machine
27
This is necessary if very little or no water flows into the
washing machine.
First, reduce the water pressure in the inlet hose:
Turn off the tap.
■
Turn the programme selector to any programme
■
(except Spin Í).
Press the Start Soaking A button, and allow the
■
programme to run for approx. 40 seconds.
Disconnect the hose from the water tap.
■
Rinse the strainer under flowing water.
■
Connect the hose.
■
Disconnect the hose from the back of the
■
washing machine.
Pull out the strainer and rinse under running water.
■
Insert the strainer and reconnect the hose.
■
Turn on the water tap and check whether water is
■
still discharged. If water is leaking, check that the
filter is correctly seated.
Turn off the tap.
■