Bosch WAJ20170ZA Manuel de l'utilisateur et instructions d'installation - Page 27
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur et instructions d'installation pour {nom_de_la_catégorie} Bosch WAJ20170ZA. Bosch WAJ20170ZA 48 pages.
Imprimer la page
13.5 Adding detergent and
care product
Note: Observe the information about
detergents and care products
→ Page 26.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 18
If required, add the care product.
3.
Push in the detergent drawer.
4.
13.6 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start / Reload
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: "End".
13.7 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 26
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 22
Press Start / Reload
1.
The activated "Ready in" time is
paused.
.
.
Press Ready in
2.
the display indicates the desired
"Ready in" time.
Press Start / Reload
3.
The changed "Ready in" time is ac-
tivated.
13.8 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press Start / Re-
.
load
To resume the programme, after
3.
the desired soaking time, press
Start / Reload
13.9 Adding laundry
Press Start / Reload
1.
The appliance pauses.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press Start / Reload
5.
13.10 Cancelling the pro-
gramme
Press Start / Reload
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse
Basic operation en
repeatedly until
.
.
.
.
.
programme.
27