Draper 19392 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Draper 19392. Draper 19392 20 pages. 12v oscillating multi-tool

Imprimer la page

5. Health and Safety Information

• ALWAYS disconnect the charger from the power

supply before removing the battery.

• Charge the battery in a dry and well-ventilated

environment in ambient temperatures between 5 and

40°C, ensuring that the ventilation slots on the

charger casing are not obstructed.

• DO NOT short-circuit the battery by connecting the

positive and negative terminals while outside of the

product.

− Keep the battery away from metallic objects that

may inadvertently allow connection of the

terminals.

Batteries

• DO NOT open, crush or burn the battery as this may

release potentially harmful chemicals.

• DO NOT expose the battery to temperatures greater

than 50°C. DO NOT attempt to charge batteries with a

temperature that is not between 5 and 30°C.

− Allow batteries that are too hot or too cold to

normalise before charging.

• DO NOT expose the battery pack to rain or other wet

conditions.

• ALWAYS remove the battery from the tool before

recycling and dispose of it in accordance with local

regulations.

• If a fire occurs, use a CO

WARNING! The electrolyte in this battery pack is

corrosive. Avoid contact with skin. If contact occurs,

flush the area with clean water and pat it dry. Seek

medical attention at the earliest opportunity and

inform the responder that the contaminant is a

"high-alkaline corrosive liquid". If contact with eyes

occurs, flush immediately with plenty of water ONLY

and seek medical advice at the earliest opportunity.

5.4 Connection to the Power Supply

(Charger)

CAUTION! Risk of electric shock. Do not open.

Always ensure that the power supply on the machine's

rating plate is compatible with the power supply to which

you intend to connect it.

The rechargeable battery pack is supplied with a UK

standard three-pin plug and is intended for connection

to a domestic power supply rated at 230V AC. An in-car

power adaptor is also supplied and is intended for

connection to a 12V DC socket found in vehicle interiors.

or dry chemical extinguisher.

This is a Class II

appliance and is designed for

†

connection to a power supply matching that detailed on

the rating label and compatible with the plug fitted.

CAUTION! Use ONLY the power supply provided.

Important: If using an extension lead, follow the

instructions that came with your lead regarding

maximum load while the cable is wound. If in doubt,

ensure that the entire cable is unwound. Using a coiled

extension lead will generate heat which could melt the

lead and cause a fire.

Double insulated

†

connection as supplementary insulation is applied to the

basic insulation to protect against electric shock in the

event of failure of the basic insulation.

– 9 –

: This product requires no earth