Draper 400W Instructions pour - Page 5

Parcourez en ligne ou téléchargez le pdf Instructions pour pour {nom_de_la_catégorie} Draper 400W. Draper 400W 20 pages.

INTRODUCTION

This hand held power tool is designed to cut wood and mild steel materials. It is intended for

domestic and light commercial use only. Any other application is considered misuse.

Stock no ........................................................................................................................... 83622

Part no ..................................................................................................................... PT400VASF

Motor:

Rated voltage ...................................................................................................... 230V~

Rated frequency ................................................................................................... 50Hz

Rated input ......................................................................................................... 400W

Revolutions per minute (no load) ............................................................ 0-3,000min

Cutting capacity:

Wood ..................................................................................................................... 55mm

Mild steel................................................................................................................. 8mm

Mitre cutting ....................................................................................................................... ±45º

Sound pressure level ............................................................................................. 86.5±3dB(A)

Sound power level .............................................................................................. 97.5±3dB(A)

Vibration level:

Wood ....................................................................................................................6.6m/s

Metal ....................................................................................................................6.9m/s

Weight ............................................................................................................................ 1.56kg

4.3 HANDLING & STORAGE

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.

-1