Draper BMSM Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Draper BMSM. Draper BMSM 20 pages. Bench mounted spindle moulder

Imprimer la page
Draper BMSM Manuel d'utilisation
GETTING TO KNOW YOUR SPINDLE MOULDER
A. 2 x M6 Bolts
B. 1 x Pin
C. 2 x Dome Head Bolts
D. 1 x Dome Head Bolt
E. 3 x Plastic Nuts
F . 5 x Dome Head Bolts
G. 8 x M5 Nuts
H. 2 x M6 Nuts
I. 4 x Plastic Nuts
-
UNPACKING: After removing the packing material, make sure the product is in perfect
condition and that there are no visible damaged parts. If in doubt, do not use the spindle
moulder and contact the dealer from whom it was purchased.
The packaging materials (plastic bags, polystyrene, etc.), must be disposed of in an
appropriate refuse collection container. These materials must not be left within the reach of
children as they are potential sources of danger.
J. 11 x M5 Washers
K. 6 x Small M5 Washers
L. 2 x M6 Washers
M.14 x M5 Spring Washers
N. 6 x M5 Washers
O. 2 x Screws
P . 4 x Wing Nuts
Q. 6 x M5 Short Hex Bolts
R. 8 x M5 Long Hex Bolts
- 7 -
S. 4 x Rubber Washers
T. 4 x C Clips
U 1 x Dome Head Bolt
V. 2 x Dome Head Bolts
W. 1 x Push Guide Bracket
X. 1 x Hand Wheel
Y. 1 x M6 Dome Head Nut
Z. 4 x Collet Adaptors