Draper D16/16F Manuel d'instructions - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Draper D16/16F. Draper D16/16F 20 pages.

1. The table

Fig. 17 can be raised or

lowered on the drill press column by

loosening the table clamp handle

turning the table raising and lowering handle

. After the table is at the desired height,

tighten handle

2. The table can be rotated 360º on the table

bracket by loosening lock handle

3. The table can be tilted right or left by

unscrewing and removing the table alignment

stud

Fig. 18.

4. Loosen table locking bolt

desired angle. Retighten bolt

returning table to the level position replace

table alignment grub screw. This will

automatically position the table surface at 90º

to the spindle.

5. A tilt scale

table bracket casting to indicate the degree

of tilt. A cursor line

the table to line up with the scale.

OPERATION AND USE

, tilt table to

. When

Fig. 20 is provided on the

is also provided on

Fig.17.

and

Fig. 18.

Fig.18.

Fig.19.

Fig.20.

- 12 -