Bosch WAK28160GB Manuel d'instruction et instructions d'installation - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et instructions d'installation pour {nom_de_la_catégorie} Bosch WAK28160GB. Bosch WAK28160GB 40 pages.
Imprimer la page
Adding laundry
After starting the programme, you can
add or remove laundry as required.
To do this, press the Start/Pause
button.
The Start/Pause indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
Do not leave the washing
Note:
machine door open for too long when
adding laundry as water from the
laundry may leak out.
If the display panel shows:
Both the YES and ¼ symbols lit up,
■
it is possible to add laundry.
A flashing NO symbol, wait until YES
■
and ¼ light up.
Do not open the door until both the
YES and the ¼ symbols are lit.
A flashing NO symbol, it is not
■
possible to add laundry.
For safety reasons, the washing
machine door remains locked when
the water level or temperature is
high, or while the drum is rotating,
and it is not possible to add laundry.
To continue the programme, press
the Start/Pause button. The
programme continues automatically.
Operating the appliance
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
Press Start/Pause.
1.
Select the other programme.
2.
Press Start/Pause . The new
3.
programme starts from the
beginning.
Cancel the programme
Programmes at high temperatures:
Press Start/Pause.
1.
To cool the laundry: Select Rinse.
2.
Press Start/Pause .
3.
For programmes at low temperatures:
Press Start/Pause.
1.
Select Spin or Drain.
2.
Press Start/Pause.
3.
Programme end during rinse
hold
– – – 0 appears on the display panel
and the Start/Pause button indicator
lamp flashes.
To end the programme, set the
programme selector to Spin/Drain or
select a spin speed. Then press the
Start/Pause button.
en
19