Draper 20849 Manuel d'instructions - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Draper 20849. Draper 20849 20 pages. Twin pack 10.8v li-ion cordless rotary drill & impact driver

Imprimer la page

INTRODUCTION

4.1 SCOPE

This cordless drill is designed for use with a variety of drill bits, intended for boring holes in

wood, plastic, metal etc. It is intended for domestic and light commercial use only.

This cordless impact driver is designed for use with insert bits and sockets, intended for a

variety of tasks where a high level of torque is required. It is intended for domestic and light

commercial use only.

4.2 SPECIFICATION

Stock No.............................................................................................................................. 20849

Part No. .......................................................................................................................... TP108VLI

Battery ................................................................................................................................ 10.8V

10.8V Cordless Rotary Drill;

Drill Capacities:

Wood ..................................................................................................................... 25mm

Mild Steel .............................................................................................................. 10mm

Maximum Torque .............................................................................................................. 25Nm

Revolutions Per Minute (no load) ................................................................ 0-400/0-1300min

Chuck Capacity ................................................................................................................. 10mm

Spindle Thread ...........................................................................................................

Sound Pressure Level ................................................................................................ 71.19dB(A)

Sound Power Level ................................................................................................... 82.19dB(A)

Vibration Level .............................................................................................................. 2.39m/s

Weight ................................................................................................................................ 800g

10.8V Cordless Impact Driver;

Maximum torque .............................................................................................................. 80Nm

Revolutions per minute (no load) .......................................................................... 0-2500min

Impact rate .................................................................................................................0-3500bpm

Drive spindle...................................................................................................... ¼" Female Hex

Sound pressure level ................................................................................................. 93.25 dB(A)

Sound power level .................................................................................................. 104.25 dB(A)

Vibration level ..............................................................................................................14.68 m/s

Weight (drill only) ............................................................................................................... 800g

4.3 HANDLING & STORAGE

Although these machines are small in size, care must still be taken when handling and lifting.

Dropping these machines will have an effect on the accuracy and may also result in personal

injury. These machines are not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If each machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

each machine will not perform at its best.

-1

⁄

x 24unf

-1