Draper 63121 Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Draper 63121. Draper 63121 12 pages. Cordless hammer drills

Imprimer la page

DRILLING WOOD AND PLASTIC

To prevent splitting around the drill holes on the reverse side, place a piece of scrap

timber under the material to be drilled.

DRILLING MASONRY

Start drilling at a low speed to prevent the drill bit from wandering. Once penetration

is achieved fully depress the trigger to achieve maximum speed and hammer power.

DRILLING METAL

Metals such as sheet steel, aluminium and brass may be drilled. Mark the point to be

drilled with a punch or nail to help the drill bit tip to locate.

SCREWDRIVING

To prevent slip or damage to the screwhead, match the screwdriver bit to the screw-

head size. To remove screws move the direction switch to the reversing position and

apply pressure to the screwhead and depress the trigger slowly.

MAINTENANCE

Neither the drill or charger require any special maintenance.

Keep both the drill and the charger in a dry place where they will not be exposed to

frost or direct sunlight.

STOCK Nos:

54452

54453

IMPORTANT:

DRAPER HELPLINE: (023) 8049 4344

OPERATION AND USE

BATTERIES

PART Nos:

CB12

CB14

Please note all repairs/adjustments

should be carried out by a qualified person.

VOLTAGES

12V

14.4V

- 10 -