Draper HD750VC Manuel d'instructions - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Draper HD750VC. Draper HD750VC 12 pages. Hammer drills

SLIP CLUTCH

If the drilling tool becomes jammed or gets

caught, the slip clutch releases.

Remove the load from the machine

immediately by pulling back the drilling

tool.

Always hold the machine tightly with both

hands and assume a secure stance.

Do not apply too much pressure. The

performance is not increased in this

manner.

SUPPLEMENTARY HANDGRIP

For reasons of safety, when working with this

type of electric power tool, the operator

should always use the adjustable handgrip.

In order to fit the handgrip on the drill,

loosen the threaded sleeve on the handgrip,

turning it in an anticlockwise direction.

OPERATION AND USE (Cont'd.)

Slide the handgrip onto the drill collar,

tilting it to the desired angle; tighten the

sleeve until it is securely attached to the

machine.

To fit the depth stop, loosen the threaded

sleeve on the handgrip, turning in an

anticlockwise direction. Insert the depth

stop into the adjustable handgrip collar,

position for the correct depth, then tighten

the sleeve until it is secure.

IMPROPER USE

The functions and use of this tool are those

exclusively indicated in this manual. ANY

OTHER USE OF THE TOOL IS

EXPLICITLY FORBIDDEN.

- 7 -