Draper 30736 Manuel d'instructions - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Draper 30736. Draper 30736 16 pages. Horizontal and vertical metal cutting bandsaw
Imprimer la page
8. BLADE GUIDE ADJUSTMENT
It is impossible to get satisfactory
work from the saw if the blade
guides are not properly adjusted.
The gap between the blade and the
guide should be .00.1" clearance,
anything larger will allow the blade
to flex. Both upper and lower
guides are adjusted in the same
way and both the inner guides are
fixed. The outer guides are in
eccentric bushes. Loosen nut ✸✌,
adjust the bearing on the front nut
✹✌. When correctly set retighten
the rear nut ✸✌. To set the blade
square with the bed, use an
engineers square (Draper Stock
No.34065) as shown in (Fig.9). To
alter the blade loosen bolt ✺✌
(Fig.10) which when loose allows
movement in the guides. When set
resecure the bolt. To allow for
different size pieces of material the
guides are adjustable. Loosening
knob ✻✌ (Fig. 11) allows the upper
guide to slide. When set retighten.
Should the lower guide require
adjustment, loosen screw ✼✌ to
move the lower guide into position,
when set secure.
OPERATION & USE
FIG.9.
✺✌
FIG.10.
✻✌
✼✌
FIG.11.
- 5-
- 9 -
✸✌
✹✌