Draper CS153 Manuel d'instructions - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Draper CS153. Draper CS153 12 pages.

OPERATION & USE

Make sure that the mains voltage matches the

Fig.2

voltage stated on the machines rating plate.

✪✌

BLADE REMOVAL AND FITTING

Set the base plate to the highest position (maximum

depth of cut).

Open the mobile lower blade guard ✪✌. Using a

30mm open ended spanner on the flats of the blade

flange ✫✌ undo and remove the flange screw ✬✌

with the hex key supplied ✭✌ and remove blade

flange ✫✌(Fig.2).

✭✌

Change the blade ensuring that the arrow on the

✫✌

✬✌

blade points in the same rotation as the arrow on the

upper blade guard.

Refit the blade flange ✫✌ and flange screw ✬✌ and

tighten (Fig.2).

Note

If a blade of a slightly different diameter is fitted the

riving knife will have to be adjusted. See Riving Knife

below.

IMPORTANT

When changing or fitting a blade always have the

depth of cut set at maximum.

- 6 -