Draper MS560/3 Instructions - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} Draper MS560/3. Draper MS560/3 4 pages.
Imprimer la page
MITRE SAW TECHNICAL DATA
✗✌
✘✌
✕✔✌
✖✌
COMPONENT PARTS
1.
Saw table.
2.
Two plastic feet with screw
holes for bench mounting.
3.
Saw frame assembly.
4.
Two cut depth stops.
5.
Guide rods.
6.
Washer for pivot arm
(see STEP 1).
✙✌
✜✌
✚✌
✛✌
✕✕✌
Specification:
Max. cutting width clamped at 45º.............100mm
Max. cutting width clamped at 90º.............160mm
Max. cutting width unclamped at 90º.........110mm
Max. cutting height.....................................110mm
Blade lengths .............................................560mm
Blade widths 18, 24 TPI...............................40mm
Table size ..................................76x348mm (WxL)
Max. reach of adjustable length stop....385mm
✕✌
✢✌
7. Pivot arm.
8. Angle indicator.
9. Four grub screws.
10. Hexagon key.
11. Rubber feet.
12. Material vice clamp.
13. Adjustable length stops.
Bow saw ...............................20mm
✕✗✌
✕✖✌