Draper VMS/KD Instructions - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} Draper VMS/KD. Draper VMS/KD 4 pages. Mitre saw
Imprimer la pageSpecification:
Max. cutting width clamped at 45°............110mm
Max. cutting width clamped at 90°............160mm
Max. cutting height ...................................120mm
Blade length..............................................550mm
Blade width .................................................45mm
Table length ..............................................400mm
Max. reach of adjustable stop ...............450mm
Weight......................................................3.1kg
1.
Vice clamp assembly.
2.
Length stop assembly.
3.
Cut depth stop.
4.
Cut depth stop screws.
5.
Two plastic feet with screw holes
for bench mounting.
6.
Base socket head screws.
7.
Pre-set angle arm.
8.
Pivot pin.
9.
Plated cursor screw.
MITRE SAW TECHNICAL DATA
COMPONENT PARTS
10. Cursor.
11. Blade tensioning nut.
12. Pivot screw.
13. Saw table.
14. Saw frame handle.
15. Saw frame guide bar carriers.
16. Saw blade.
17. Saw frame carriers.
18. Saw frame assembly.