Draper 65025 Manuel d'instructions - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Draper 65025. Draper 65025 12 pages. Variable speed die grinder

Imprimer la page

Fig.1

✚✌

✛✌

Fig.1

1. Variable Speed Switch

2. Rating Plate

3. Housing/Handgrip

4. On/Off Switch

IMPORTANT

Make sure that mains voltages match the voltage

stated on the machine's rating plate.

GUARD

Given the particular type of operation for which the

machine will be used, it has not been fitted with a

protective guard on the grinding point. Therefore

extreme care must be taken when the grinding

point is inserted and the motor has been started.

SWITCH

The switch fitted to the die grinder prevents

accidental machine starting. However, a locking

position has also been provided.

Starting – Push the slide ✪✌ forwards until it

locks into position (direction I), in this position the

switch is locked "ON". (Fig.2).

WARNING

To unlock the switch, press the slide towards

the position "0". (Fig.2).

GETTING TO KNOW YOUR DIE GRINDER

✙✌

OPERATION & USE

✖✌

✘✌

✜✌

5. Head

6. Collet Shaft

7. Collet Nut

8. Wrench × 2

Fig.2

- 5 -

✗✌

✪✌

✕✌