Draper D20 98104 Manuel de démarrage rapide - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Draper D20 98104. Draper D20 98104 14 pages. 20v brushless 125mm/115mm angle grinder

Imprimer la page
6.8 BATTERY PACK CHARGE STATUS
– FIG.10
Press the charge level indicator button (12.2) to display
the battery charge level.
(12.2)
0 – 10%
50 – 75%
75 – 100%
10
FIG.
7.

MAINTENANCE AND TROUBLESHOOTING

7.1 TROUBLESHOOTING GUIDE

Problems
Tool does not operate.
Motor runs, but slowly/ losing
power.
Machine vibrates.
Wheel will not cut/grind.
Battery pack doesn't charge / non
illumination of charger.
0 – 25%
25 – 50%
Possible cause
– Battery pack no charge.
– Battery pack faulty or damaged.
– Battery pack no charge.
– Battery pack faulty or damaged.
– Wheel damaged or out of
balance.
– Wheel loose.
– Incorrect disc fitted.
– Fuse blown in charger plug.
– Charger faulty.
6.9 BATTERY LIFE EFFICIENCY AND
CHARGING ADVICE
– A rechargeable battery will be hot immediately after
use. If such a battery is recharged immediately after
use the battery life will be shortened. Leave the
battery and recharge it after it has cooled.
– The battery needs to be warmed-up or cooled down
to prevent damaging to the batteries internal
components.
– 12 –
Required action
– Re-charge battery pack.
– Replace battery pack.
– Re-charge battery pack.
– Replace battery pack.
– Replace wheel.
– Stop machine immediately
– when stopped, refit accessory.
– Fit correct disc for material/
application.
– Replace fuse.
– Replace charger.