Bottom-Up FlexShade
Small and Large Hardware
Premium manually-operated bottom-up shade
Overview - Components
Read and understand all warnings
before beginning installation.
Contents
Overview - Components .......................................................................................1
NEXD,
®
CAUTION
(Page 2 of this document)
INSTRUCTIONS
INSTALLATION & OPERATION
PLEASE READ -
Important Installation Information
Caution:
1. Inspect all boxes to make sure you have received the
proper shades and parts. Controls may be shipped
separately, or in same carton as shades.
2. Open cartons lengthwise, taking care not to cut into
cardboard shipping container.
3. Before mounting shades, verify measurements on
label provided with shade, and ensure unit is installed
at correct width.
4. All endcaps, fascia, pocket headbox, and other
hardware must be installed level. Shades must be
level and square.
6. Read the following installation guidelines
thoroughly and follow them carefully. Failure to
do so may cause product to fall or otherwise fail,
and invalidates warranty.
7. Installer is responsible for selecting mounting
hardware appropriate for site conditions.
TOOLS REQUIRED
PENCIL
TAPE MEASURE
Scan this QR Code with
your smartphone to view
our online video, or visit
draperinc.com/go/NEXDinfo
Section 7 - Hem Bar ..............................................................................................5
If you have any difficulties installing or servicing your
Bottom-Up FlexShade
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2020 All Rights Reserved
PLIERS
POWER DRILL
LEVEL
HARDWARE
(by others)
............................................................7
NEXD, call your dealer or Draper, Inc.
®
|
FORM: Bottom-Up_NEXD_Inst20
Imprimer la page