Draper 1/2S-300D Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Draper 1/2S-300D. Draper 1/2S-300D 16 pages. 230v 1/2 sheet sander

Imprimer la page

BASIC SANDER OPERATIONS

8.1

SWITCH - FIG. 1

Ensure the sander is raised off the workpiece.

To OPERATE press the trigger

To use CONTINUOUSLY press trigger

button

and hold in. Release trigger

Release button

To STOP the machine press trigger

button

will automatically release.

This machine is intended for light/medium duty

sanding of wood and similar materials only.

Apply equal pressure on the workpiece with the base

pad remaining flat. Attempting to sand areas using

only the edge will lead to damage to the base pad.

Note: Excess pressure when sanding reduces the

effectiveness of tool and will cause the motor to

overload.

Do not overload this machine.

Abrasive sheets are consumable items. Replace

abrasive sheets when clogged with material or when

surface/edge has rips, cracks or worn areas.

Note: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

8.2

CONVENTIONAL ABRASIVE

SHEET INSTALLATION /

REPLACEMENT - FIGS. 2 - 3

In order to fix the abrasive paper, proceed as follows:

Open one fixing clamp

of the abrasive paper into the exact position.

Close clamp.

Position the sheet of abrasive paper on the base

pad and wrap the sheet around the front of the

base pad

Open the second clamp

end of the abrasive paper then close clamp.

Check that the sheet is firmly secured and that it

completely covers the base pad of the tool.

Abrasive sheet must be centrally positioned and

taught over the base pad.

, the machine will continue to run.

and insert one end

and insert the other

, press

once and

FIG.1

FIG.2

FIG.3

- 11 -