BCS 728 Manuel d'utilisation - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} BCS 728. BCS 728 20 pages. Two wheel tractors
Également pour BCS 728 : Manuel d'utilisation (20 pages)
Imprimer la page
Two Wheel Tractor Power Unit
Every Week
•
With the machine on a level surface, check the gearbox oil level, top up as necessary using the
correct oil as listed below. The gearbox oil level should reach between the two notches on the
dipstick (fig. 2, C) .
After the First 2 Weeks or 30 Hours of Work
Replace the gearbox oil filter ONLY, (fig. 1, A), part number 58056249.
•
Check the gearbox oil level using the dipstick (figs. 1 & 2, C) , run the machine for 2-3 minutes
•
and recheck gearbox oil level, top up as necessary using the correct oil as listed below.
Every 100 Hours of Work or 12 Months
•
Change the gearbox oil by removing the gearbox drain plug (fig. 3, B) .
Replace the gearbox oil filter (fig. 1, A), part number 58056249.
•
•
Clean the gearbox drain plug and refit.
•
Fill gearbox using the correct oil and quantity as listed below.
•
Check the gearbox oil level, run the machine for 2-3 minutes and recheck gearbox oil level.
C
Page 12
Service Information
Fig. 1
A
To replace the oil filter (fig. 1, A)
1. Using the correct spanner, remove the
filter.
2. Smear a film of oil on the rubber gasket
of the new filter.
3. Mount the new filter, screwing and
tightening by hand only.
TWT/PU/0413