Drawmer CMC7 Manuel - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Drawmer CMC7. Drawmer CMC7 12 pages. Surround monitor controller

DRAWMER

SURROUND INPUTS

The eight balanced inputs to the CMC7 are via a 25 pin D-Sub connector wired to

the Tascam standard (Refer to 'Audio Connections' for wiring information). The

CMC7 does not have input level trims, and their is only one volume control that

effects all eight channels in exactly the same way regardless of the source origin,

be it surround 7.1, 5.1 or 8 independent sources, meaning any individual channel

volume level to balance the mix should be performed prior to reaching the CMC7.

7.1 SPEAKER OUTPUTS

The CMC7 has eight balanced outputs. Connection is via a 25 pin D-Sub connector

wired to the Tascam standard (Refer to 'Audio Connections' for wiring information)

and a 25 pin d-sub to 8x XLR snake should be used to connect each individual

speaker. It has no speaker output trims so monitor calibration should take place

after the CMC7 via active speaker adjustments.

PHONES

The headphone output is a 1/4" TRS jack that is capable of driving a wide number

of headphones from budget to professional - The

for the headphone amplifier is found on the top panel above the main volume

(4)

control

, and is used to trim the volume of the headphones.

Because the headphone amplifier is of such a high quality the headphone output

could also be used as a source for a second set of stereo monitors, should they be

required, the trim control being used for speaker level matching.

POWER

The CMC7 will be supplied with an external switching mode power supply that is

capable of 100-240Vac continuous (90-264Vac max) and should work globally, but

is supplied with a cable suitable for domestic power outlets in your country. We

strongly advise that the power supply that has been supplied with the CMC7 is

used, rather than one with the equivalent ratings. The push button switch activates

the CMC7. Note that a timed relay protection circuit has been incorporated into

circuit to prevent bangs and other potentially harmful artifacts from occurring during

power up and power down.

Headphone Volume Level

knob