Bosch 800 Series Manuel de démarrage rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Bosch 800 Series. Bosch 800 Series 7 pages. Built-in wall ovens
Également pour Bosch 800 Series : Manuel d'instructions d'installation (24 pages), Manuel d'installation (40 pages), Manuel d'utilisation et d'entretien (12 pages), Manuel d'installation (23 pages), Manuel d'installation (28 pages), Manuel d'installation (32 pages), Manuel d'instruction (32 pages), Manuel d'installation (32 pages), Manuel de démarrage rapide et de sécurité (7 pages), Manuel d'utilisation et d'entretien (40 pages), Manuel d'installation (40 pages), Manuel d'installation (32 pages), Manuel d'instructions d'installation (40 pages), Manuel d'installation (48 pages), Manuel d'utilisation et d'entretien (33 pages), Manuel d'utilisation et d'entretien (49 pages), Manuel de démarrage rapide et de sécurité (13 pages), Manuel d'installation (32 pages), Manuel d'entretien (36 pages), Manuel d'instructions d'installation (29 pages), Manuel d'utilisation et d'entretien (24 pages), Manuel d'utilisation et d'entretien (40 pages), Manuel d'instructions d'installation (28 pages)

Bosch 800 Series Manuel de démarrage rapide

FAQs

Q
Why is food remaining on dishes after I run the cycle?
:
A
It is possible the dishes do not have adequate clearance between them.
:
Also, be sure nothing is blocking spray arm and that the filter is clean. Select an
intensive cleaning cycle.
Q
Why does the cycle run a long time?
:
A
Sensors in the dishwasher automatically increase the cycle time to ensure a
:
good wash when heavy soil is detected.
A
Incoming water may not be hot enough and dishwasher has to heat it.
:
Q
Why is E:XX (X can be any number) displayed?
:
A
This is an error code. For example E:22 indicates there is water in the sump
:
because the filter is blocked or needs cleaning. See the Use and Care Manual
for a list of error codes.
ADJUSTING THE SETTINGS
Tip: The simplest way to change the settings is with the Home Connect
Listed below are some of the most used settings. To see all the settings, refer to
the full online manual or go to Dishwasher » Settings in the Home Connect app.
Setting
Factory setting Description
• Water hardness
•:‹‹
•:‹‹ - •:‹ˆ
§-Rinse Aid
§:‹†
§:‹‹-§:‹‡
š-Intensive drying
š:‹‹/ off
š:‹‹-š:‹‚
›-Buzzer signal
›:‹ƒ
›:‹‹-›:‹„
§"-Factory reset
§"
Press the On/Off button.
1.
Hold down button A (see pages 6-7) to access the settings menu.
2.
Press A repeatedly to select the desired setting.
3.
Press Start to change the value of the setting.
4.
Press A button to save the setting.
5.
8
app.
TM
Setting the water hardness.
Dispenses the amount of rinse aid,
which affects drying.
Improved drying for glasses and
plastic, by increasing the tempera-
ture and cycle length.
The volume of the signal for the end
of cycle.
Restores the factory settings on the
dishwasher.

Tips

MAINTENANCE
Clean surfaces with damp cloth and mild
soap.
NOTICE: Do not use abrasives or bleach
based cleaners. Do not use stainless steel
cleaner on black stainless or anti-finger
print surfaces.
Clean the filter 3-12 times a year, depending
on usage.
It is also recommended to run Machine
Care program to keep the tub clean. It is
accessible through the Home Connect app.
FOR BEST RESULTS
1
Use rinse aid
for better
drying.
3
Adjust upper
rack as needed
PUSH
for large items.
Cleaning filter
Cleaning spray arm
2
Scrape off
food,
but do not
rinse.
9