Bosch 800 Series Manuel d'instructions d'installation - Page 12

WARNING

Avoid Tip Over Hazard!

Do not use the dishwasher until it is completely

installed. When opening the door on an uninstalled

dishwasher, carefully open the door while

supporting the rear of the unit. Failure to follow

this warning can result in serious injury.

LEVELING THE DISHWASHER

The unit should now be ready to slide into the cabinet

opening. To avoid scratching the floor, use floor protection

and caution when sliding the dishwasher into the cabinet.

Make sure that the hoses and cords do not bunch up behind

the unit or kink as you slide the unit back. Make certain

to slide the unit into place before raising the leg levelers.

Level the dishwasher horizontally by turning feet clockwise

to raise or counter-clockwise to lower front of the unit.

Level the dishwasher vertically by turning center screw to

raise or lower the back.

Figure 17

SECURING THE DISHWASHER

Center the dishwasher in the opening before securing it to

your cabinet or countertop as shown in Figure 18.

Remove the top cutlery rack as shown in Figure 19 *.

Figure 18

Figure 19 *

Drive the mounting screws through the holes in the mounting

brackets

shown

Side Mount (Figure 21).

Figure 20

For Top Mount

Torx T 20

For Side Mount

Torx T 20

* Depending on whether the dishwasher includes a

top cutlery rack.

for

Top

Mount

(Figure

Figure 21

20),

(2 mm)